| Society

Kentucky Fried 3D Printing

In a future where any garage, shed or corner of a living room could be turned into a miniature factory, what will be the point of large scale manufacturing?

A picture of a broken window by Carl Byron Batson

[dropcap style=”font-size:100px; color:#992211;”]C[/dropcap]olonel Sanders is known for many things.

Amongst the chicken community, he is seen as the Destroyer of Worlds, the Archfiend and the Bringer of Woe. Amongst teenage boys, bachelors and students who can’t cook, he is seen as both source of manna and wet nurse. In Japan, rather inevitably, it is even stranger. Meanwhile, for the manufacturing industry, he could be well be its saviour.

How so? The Colonel showed that it is intellectual property and how it is shared and monetised that will be key to success. For this, we need to look into his past. You see, Sanders – before he was elevated to Colonel by the state of Kentucky for services granted to hungry drunks on a Saturday night – didn’t open any branches of KFC himself.

Royalties

Instead, he travelled from restaurant to diner to Mom ‘n Pop truck stop, offered to cook them dinner and produced chicken with his recipe. If they liked it, as they often did, the Colonel would then offer them a deal. They could buy the rights to his recipe – in exchange for royalties and certain contractual requirements.

A legend (and a vast fortune) was born.

Strangely enough, this brings us to 3D printing. In many ways, it could be the ultimate disruptive technology. Domestic printers are already becoming steadily more available and their quality and cost effectiveness will continue to improve. In 2013 we find ourselves in the same position that the first users of the Mosaic web browser were in just 20 years earlier – at the very start of considerable social and economic change.

We all know, of course, how this has ended for the media and entertainment industries.

In two words: Pirate Bay.

A picture of a broken window by Carl Byron Batson

A similar fate awaits manufacturers. In a future where any garage, shed or corner of a living room could be turned into a miniature factory, what will be the point of large scale manufacturing for anything except producing the largest, most complex and sophisticated products? This may have geopolitical implications.

[quote]whole nations depend

on the sort of

cheap-and-cheerful

or cheap-and-nasty

manufacturing that 3D

printers threaten[/quote]

Quite apart from the possibility, hopefully still remote, of any half-wit with delusions of gangsta grandeur being able to print out a working knock-off of a Glock semi-automatic pistol, whole nations depend on the sort of cheap-and-cheerful or cheap-and-nasty manufacturing that 3D printers threaten to dominate.

China

Indeed, the rise of China was built on its churning out wave upon wave upon wave of cheap plastic goods. Unless it can ‘skill up’ and directly compete with the much more sophisticated end of the manufacturing market (currently dominated by the likes of Germany, South Korea, Japan and America) it may find itself in the same parlous situation that record labels and film studios find themselves today. Needless to say, a collapsing Chinese economy is not going to be a pleasant experience for anyone.

Then there is open source, which threatens manufacture as a whole. If we can imagine designers, developers and makers producing and uploading free creative commons templates for a range of goods, the need for most manufacturing businesses dries up overnight. As cottage industries based around spinning and pottery were crushed by mass industrialisation, so mass industrialisation might in turn be crushed by new cottage industries.

 

The future, after all, has a cyclical quality to it.A picture of some burnt ruins by Carl Byron Batson

This is all very well, and doubtless a myriad of starry eyed tech-evangelists and hipsters will already be wetting themselves at this brave new world. Yet there will be a considerable cost that won’t be worth paying. Mass unemployment, decay and even full-on dereliction of industrial bases and communities leap to mind – the future might well look a lot like Detroit but on a much larger scale.

Also threatened are the two things large corporations are, at least hypothetically, good for: research and development, and being large enough to be held to account.

Put simply, it takes huge amounts of investment to develop and improve products, while legal measures can be employed to ensure that certain standards in production can be maintained and safety standards at least entertained. Open source and pirated templates will often lack these macro features, and may indeed kill off innovation in the long run, though their small-scale and relative agility will at least mean some novel features will keep cropping up.

Meanwhile, there is the danger that we will lose one advantage of the old middleman system – having someone to blame if a design is faulty (and so also bear the legal obligation to make sure this does not happen).

Mini factories

Yet perhaps we are looking at the future in the wrong way. Perhaps the thousands of mini factories about to open up are not a locust swarm descending on manufacturing but the high tech future equivalent of the Mom ‘n Pop restaurants mentioned earlier. After all, there is no monopoly on making food, per se, but quality still has a value all of its own.

Which brings us back to the Colonel. Enterprising and nimble manufacturers could respond to the 3D printing revolution by firstly focussing on producing the things and devices that small scale 3D printing can’t make. The future of major manufacturing might have more in common, then, with bespoke tailoring, Damascus steelmaking and the intriguing possibilities granted by modular customisation.

Yet they could also remember how the Colonel built his empire – he didn’t try to control food production itself, but he made sure the value of his intellectual property meant he could sell or lease those rights, still keep overall control, and make a mint.

Piracy and civil violations

Manufacturers could, therefore, stay in business by producing templates with high quality specifications, granting limited licenses to use them on domestic printers. This would come with contractual obligations on the part of the licensee and an inbuilt means to track piracy and civil violations.

The open source templates, of course, would compete with this model, but the maker would have the advantage of being able to choose between free and flexible or proprietary and high quality. Large scale manufacturers still have time to make these changes, but they also risk being wrong-footed by their own answer to the Pirate Bay.

For now, then, the question still remains as to whether industry will end up as the cook… or the chicken.

Photos: Carl Byron Batson. Not to be used or reproduced without prior permission

Sponsor

2 Replies to “Kentucky Fried 3D Printing”

  1. Trevor Bacon says:

    Maybe we are getting ahead of ourselves because currently it takes a lot of time to manufacture using these systems. a sheet metal press can produce hundreds or thousands of a particular component in a fraction of the time. However one has to also think of the time that it takes to prepare the metal for manufacture, with these systems all that needs to be produced is the powder. Also perhaps it may create openings in crafting handmade goods, bespoke shoes from natural leather. People may even begin to appreciate, look after and repair, like we all used to go to the snobs to get our shoes re heeled and so on. Then what about small repair shops, think of the fact that no longer will the life of any product be dictated by the availability of spare parts. The original designers/ manufacturers could gain a small royalty each time that part is reproduced. Apparently they are so good now they can be used to make jet engine parts so I don’t see a problem with a hoover. With the revolution in robotics I can’t see any reason why they can’t make a home PCB board manufacturing system that can also be controlled by a home computer.

    When I think of it it is one of the things that makes me very hopeful for the future. One of the best things is that we can all become inventors. Also it means that we can get past this madness with production where things have to be produced in the largest quantities possible with built in obsolescence and well defined life spans. We could also get past all this wall to wall advertising. Perhaps it may even mean that people will be less moved to by the latest version of this or that product. Also take the problem of tools, most people buy a set of tools that basically get used once in a blue moon. Without the tool you can’t do the job but most of the time it simply sits in the box. If you could have access to any tool ‘on demand’, and you only produced the tools you needed, when you felt you needed them then the likely hood is that you would only manufacture a very few tools. Take a socket set. On the whole most bolts will be in the range of 10mm to 17mm, the sockets used most often will be 10mm, 11mm, 13mm, all the rest, 3mm to 9mm and from 19mm to whatever just sit in the box and are seldom if ever used. Some other specialists will used only the small sizes while heavy engineering will use only the massive sockets. On that basis for life I think there could be a revolution in the way we think about what we need, most of what we have is clutter.

    On the whole though I do wonder if this will be anything but an interesting and very useful tool for those who are interested in such things and that people will still be buying the bulk of their purchases in the traditional way.

    • ThisIsTrickyDisco says:

      ‘People may even begin to appreciate, look after and repair, like we all used to go to the snobs to get our shoes re heeled and so on. ‘

      This is something we need to be doing anyway, regardless of 3d printing. Concern for the environment is one good reason, but as ever, it needs to appeal to other needs too. I’ve not heard the cobbler’s referred to as ‘the snobs’ before, but it’s an interesting little phrase. I’d love to know where that comes from.

      But anyway, I really recommend a good cobbler if you can find one. A re-heeled/re-soled pair of winter boots will last another couple of winters for much less than the price of a decent pair of new boots. Fewer wasted resources, cheaper, plus you get to hold onto what might be a much-loved pair of boots.

      Apply the same sort of thinking to the rest of your life – reject the vapid culture of disposability and embrace durable quality. It saves money in the long run, and you get the added luxury of having better things.

      Which is why 3d printed items will be fine for knickknacks and internal components, but won’t replace wood, leather, natural fabrics etc in the luxury end of the market

Our weekly newsletter

Sign up to get updates on articles, interviews and events.